Audio-Technica AT8031 Cardioid Condenser Handheld Microphone

  • Audio-Technica AT8031 Cardioid Condenser Handheld Microphone

In Stock

  • Fast Delivery 

    Next Day UAE Delivery 
    3-5 Working Days all over th world
    more details here

Highlights

  • Ideal for close-up vocals, overheads, piano and strings

  • Low-mass diaphragm ensures minimum distortion

  • Cardioid pattern provides added warmth when used close up

  • Operates on battery or phantom power

The AT8031 is ideal for close-up interviews, vocals, overheads, piano, and strings. Its cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source. The mic’s proximity effect provides added warmth when used close up. Features include a large protective screen that reduces “popping” and sibilant distortion. It operates on battery or phantom power.

    • Ideal for close-up vocals, overheads, piano and strings

 

    • Low-mass diaphragm ensures minimum distortion

 

    • Cardioid pattern provides added warmth when used close up

 

    • Operates on battery or phantom power

 

    • RoHS compliant—free from all substances specified in the EU directive on hazardous substances

Specifications

Element Fixed-charge back plate permanently polarized condenser
Polar Pattern Cardioid
Frequency Response 30-20,000 Hz
Low Frequency Roll Off 80 Hz, 12 dB/octave
Open Circuit Sensitivity Phantom: –44 dB (6.3 mV) re 1V at 1 Pa
Battery: –45 dB (5.6 mV) re 1V at 1 Pa
Impedance Phantom: 250 ohms
Battery: 300 ohms
Max Input Sound Level Phantom: 137 dB SPL, 1 kHz at 1% T.H.D.
Battery: 123 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range Phantom: 113 dB, 1 kHz at Max SPL
Battery: 99 dB, 1 kHz at Max SPL
Signal to Noise Ratio 70 dB, 1 kHz at 1 Pa
Switches Flat, roll-off
Power Requirement 11-52V DC, 2 mA typical
Battery Type 1.5V AA/UM3
Battery Current / Life 0.4 mA / 1200 hours typical (alkaline)
Weight 205 g (7.2 oz)
Dimensions 193.0 mm (7.60") long, 50.3 mm (1.98") head diameter
Output Connector Integral 3-pin XLRM-type

AT8031
AT8405 stand clamp
battery
protective pouch
technical data sheet