DJI Ronin 2 Professional Combo - AMT # DJI-R200-C1

Product Code - AMT # DJI-R200-C1

In Stock

  • Fast Delivery 

    Next Day UAE Delivery 
    3-5 Working Days all over the world
    more details here

Highlights

    • *shown with optional equipment
    • For DSLRs / Cinema Cameras
    • 30 Pound Payload Capacity
    • Enhanced SmoothTrack Algorithm and GPS
    • Upright, Underslung, and Briefcase Modes
    • Easy Underslung/Upright Transitions
    • 2-Axis Mode for Use with Steadicam
    • Retractable Feet/Self-Supporting Design
    • Camera Control For Select Cameras
    • 2.4 / 5.8 GHz Switchable Remote
    • Up to 0.6 Mile Control Range
Show More

SIMILAR PRODUCTS

DJI Ronin-MX 3-Axis Gimbal Stabilizer DJI Ronin 2 Professional + Ready-rig Combo

Ronin 2 exists to let filmmakers capture the scene they see in their mind. Upgraded high torque motors allow it to support a wider range of cameras, resist high winds and G-forces caused when mounted to a car and keep it moving smoothly in flight.

HIGHER TORQUE, MORE POWER, SAME PRECISION
With up to eight times more powerful motors than previous iterations, Ronin 2 can withstand sustained speeds of over 75mph with camera builds as heavy as 30lbs. We’ve increased power without sacrificing control. With encoded motors and extreme precision, the same 0.02° of accuracy remains.

ACCESSORY SUPPORT
With the new Ronin power hub, essential accessories such as DJI Focus and wireless video transmission systems could gain power and communicate data with Ronin 2.

EASY
The simplicity of Ronin has been amplified with Ronin 2, making setup and use easier than ever. Everything, from mounting cameras to balancing and tuning, powering accessories and transportation has been tweaked and refined for ease and speed.

INTELLIGENT
Enhanced intelligence means filmmakers can get shots with Ronin 2 that would once have needed specialist expertise or additional equipment, from total smoothness control to studio-oriented smart features.

Ronin 2 Gimbal 1x
Carrying Case 1x
Ronin 2 Power Hub 1x
Camera Mounting Plate 1x
Camera Upper Mounting Plate 1x
Remote Controller 1x
Battery Compartment 1x
Intelligent Battery (TB50) 2x
Battery Charger 1x
Power Cable 1x
Charging Hub 1x
Grip 1x
Accessories Package (Screws & Hex Keys) 1x
Cables Package (Red Power Cable, Arri Power Cable, 2-pin Power Cable, DC Power Cable, 6-pin-to-P-tap Adapter, USB Type-C Data Cable, Control Cable for Red, Control Cable for Arri, Ronin 2 Power Cable, S-Bus Receiver Cable, 1 each.) 1x
Manual Package 1x
Monitor Mounting Bracket 1x
15mm Rod Mount 1x
15mm Extension Rod 2x
Ronin 2 Universal Mount 1x

Specifications::

SPECS:

GENERAL

Built-In Functions Operation Modes
-Underslung Mode
-Upright Mode
-Briefcase Mode
-Handheld, Car Mount, Aerial, Tripod, & Steadicam Mode
Built-in, independent IMU module
DJI Advanced 32-Bit ARM Processor
DJI Specialized Gimbal Drive Motors with Encoders
Dual Battery System
Bluetooth Module
D-Bus Receiver Supported
2.4 GHz/5.8 GHz Receiver
Temperature Sensors
Built-in Touch Panel
Built-in GPS
USB Type-C Connection
Power and Video Signal through Slip Ring

MECHANICAL & ELECTRICAL CHARACTERISTICS

Working Current Static current: 300 mA (@22.8 V)
Dynamic current: 500 mA (@22.8 V)
Locked motor current: Max 15 A (@22.8 V)
Run Time 8 hours
2.5 hours (when powering gimbal, camera and accessories at the same time)
Operating Temperature -4°F ~ 122°F (-20°C ~ 50°C)
Weight Including handle bar: 12 lb (5.5 kg)
Excluding handle bar: 9 lb (4.2 kg)
Gimbal Dimensions Excluding handle bar: 350 mm (W) x 416 mm (D) x 530 mm (H)
Including handle bar: 630 mm (W) x 416 mm (D) x 720 mm (H)

PERIPHERAL

Camera Tray Dimensions Maximum depth from the center of gravity on camera base plate: 245 mm
Maximum height measured from top of the camera base plate: 165 mm
Maximum width: 180 mm
Accessory Power Connections 14.4 V x 4 Camera Cage (Combined 8 A), 12.6 V x 2 Pan Motor (Combined 4 A), 12.6 V x1 P-Tap (8 A)
GCU Input Power Intelligent Battery: 4280 mAh-22.8 V
Connections 2.4 GHz/5.8 GHz Remote Control, Bluetooth 4.0, USB Type-C
PC Assistant Software Requirements Windows 7 or above; Mac OS X 10.11 or above
Mobile Assistant Software Requirements iOS 9 or above; Android 4.4 or above

WORKING PERFORMANCE

Load Weight (Reference Value) 30 lbs (13.6 kg)
Angular Vibration Range ± 0.02°
Maximum Controlled Rotation Speed Pan axis: 400°/s
Tilt axis: 360°/s
Roll axis: 360°/s
Mechanical Endpoint Range Pan axis control: 360° continuous rotation
Tilt axis control: ±135°
Roll axis control: ±220°
Controlled Rotation Range Pan axis control: 360° continuous rotation
Tilt axis control: +45° to -135°
Roll axis control: ±45°

Ronin 2 Gimbal 1x
Carrying Case 1x
Ronin 2 Power Hub 1x
Camera Mounting Plate 1x
Camera Upper Mounting Plate 1x
Remote Controller 1x
Battery Compartment 1x
Intelligent Battery (TB50) 2x
Battery Charger 1x
Power Cable 1x
Charging Hub 1x
Grip 1x
Accessories Package (Screws & Hex Keys) 1x
Cables Package (Red Power Cable, Arri Power Cable, 2-pin Power Cable, DC Power Cable, 6-pin-to-P-tap Adapter, USB Type-C Data Cable, Control Cable for Red, Control Cable for Arri, Ronin 2 Power Cable, S-Bus Receiver Cable, 1 each.) 1x
Manual Package 1x
Monitor Mounting Bracket 1x
15mm Rod Mount 1x
15mm Extension Rod 2x
Ronin 2 Universal Mount 1x