DJI Ronin-M 3-Axis Handheld Gimbal Stabilizer - AMT # DJI-510

Product Code - AMT # DJI-510

In Stock

  • Fast Delivery 

    Fast Delivery
    3-5 Working Days all over the world
    more details here

Highlights

    • Supports Cameras up to 8 Pounds
    • Precision of Control: ±0.02°
    • Transmitter for Remote Pan/Tilt Control
    • Tool-Less Balance Adjustment System
    • Assistant Software for iOS and Windows
    • Bluetooth Wireless Interface for Setup
    • Silent Mode For Quiet Operation
Show More

SIMILAR PRODUCTS

DJI Ronin-MX 3-Axis Gimbal Stabilizer DJI Ronin 2 Professional Combo

DJI Ronin-M 3-Axis Handheld Gimbal Stabilizer - is a camera stabilization system designed to give the operator close to the freedom of unencumbered handheld shooting but without the hand-shake. Suitable for most camera types and configurations up to 8 pounds, the Ronin-M uses brushless motors that work on three axes: one for side-to-side "roll" - keeping the horizon level - one for tilt, and one for pan. The system is computer-controlled and features a tilt range of 105⁰ up / 165⁰ down plus a roll range of ±110⁰. Furthermore, the system boasts a precision of control of ±0.02°, enabling precise camera moves and stability correction against even very fine movements. In addition to handheld shooting, the gimbal can be used in vehicle mounting scenarios and other contexts where vibrations or other abrupt movements would make tripods and rigid camera support systems unsuitable. 

The Ronin-M supports dual-operator shooting, much like working with a jib that has a motorized pan/tilt head. In this mode, a second operator would use the included transmitter (radio controller) to manually control camera pan and tilt independently of which way the Ronin-M itself moves. The included transmitter/receiver system operates on 2.4 GHz and is proprietary. If you prefer to use a third-party transmitter there is a D-Bus port on the Ronin-M to install your own receiver. 

As with sled and vest style stabilizers, motorized gimbal systems require balancing before use. Once balanced, you can configure the Ronin-M for your particular camera arrangement using the Assistant Software for compatible iOS and Windows (Desktop) devices with Bluetooth. Because every camera and lens combination has a different mass and weight distribution, there is an ATS (Auto Tune Stability) procedure in which each axis will adjust individually, repeating the process until all three are aligned. A gimbal tuning stand is provided so you won't have to hand-hold the rig during this process. 

The included 4S lithium-polymer battery powers the Ronin-M for up to six hours. It is a "smart" battery, meaning power regulation and protection circuitry is built-in and there is no separate balancing lead, unlike many lithium-polymer batteries. A charger is also included, and it is important to always use chargers designed for the Ronin-M battery because of the smart circuitry. Two 12V DC PowerTaps and one USB power port on the camera base allow you to power on-camera accessories directly from the Ronin-M battery to simplify your charging regime and avoid unnecessary added weight.

For Cameras Up to 8 lb
The Auto Configuration feature means the Ronin-M can adapt to a range of camera sizes, and is ideally suited for compact video cameras, mirrorless cameras, and DSLRs. It is suitable for payloads up to 8 pounds.
SmoothTrack Control
SmoothTrack gives a single gimbal operator the ability to translate their tilt and pan movements of the gimbal into smooth and stabilized movements of the camera's angle. This is designed to make framing of broad wide-angle scenes or even shooting in close quarters much easier during single gimbal operator use.
Auto Configuration
After balancing the camera with a simple tap of the ATS (Auto Tune Stability) button, Ronin-M will be automatically tuned for the mass and weight distribution of your camera rig. The gimbal will intelligently adjust parameters based on the camera rig's weight and independently adjust each of the three axes until an optimal setting is found.

Specifications::

SPECS:

Performance
Load Weight (Reference Value): 8 lb / 3.6 kg
Angular Vibration Range ±0.02°
Maximum Controlled Rotation Speed Pan Axis: 90°/s
Tilt Axis: 100°/s
Roll Axis: 30°/s
Mechanical Endpoint Range Pan Axis Control: 360°/s
Tilt Axis Control: +105° /-165°/s
Roll Axis Control: ± 110°/s
Controlled Rotation Range Pan Axis Control: 360°/s
Tilt Axis Control: +105° /-165°/s
Roll Axis Control: ± 25°/s

Electrical and Mechanical
Motor Type 3 x Brushless
Working Current Static Current: 300 mA (at 16 VDC)
Dynamic Current: 600 mA (at 16 VDC)
Locked Motor Current: 10 A maximum (at 16 VDC)
Sensors Independent IMU module
Temperature sensor
Processing 32-bit DSP processor

Receiver
Frequency 2.4 GHz
Expandability D-Bus receiver supported

Connectivity
Wireless 2.4 GHz for transmitter (remote controller)
Bluetooth 4.0
Wired 2 x 12 VDC regulated PowerTap
1 x USB power output (500 mW)
1 x DJI Lightbridge interface
System Requirements
Assistant Software Desktop: Windows (32- or 64-bit): 8, 7, XP SP3
Mac OS X: 10.9 or above

Mobile:
iOS 7.0 or later
General
Control Modes Underslung Mode
Upright Mode
Briefcase Mode
Supported Camera Dimensions Maximum depth at center of mass on camera base plate: 4.7" / 120 mm
Maximum height measured from top of camera base plate: 7.7" / 195 mm
Maximum width: 6.3" / 160 mm
Power Requirements 4S Ronin-M Battery
Operating Temperature -5 to 122°F / -15 to 50°C
Dimensions (W x D x H) 19.7 x 8.3 x 16.5" / 500 x 210 x 420 mm
Weight 5.07 lb / 2.3 kg (fully loaded with handlebar)

DJI Ronin-M 3-Axis Handheld Gimbal Stabilizer
Ronin-M Transmitter (Controller)
Ronin-M 4S Battery
Battery Charger
Handle Bar
Turning Stand
Cable Pack
Micro-USB Cable
Camera Mounting Plate
2 x Camera Screw A (1/4"-20)
2 x Camera Screw B (3/8"-16)
2 x Camera Screw C (1/4"-20)
2 x Camera Screw D (3/8"-16)
Lens Support Screw
Lens Support
3 x Allen Wrenches